top of page

J-B Weld High Heat Epoxy Syringe 25ml

50197UK.jpg
50197UK

Strength

3900 PSI

Set Time

5 minutes

Functional Cure

1 Hour

J-B Weld HighHeat is a two-part epoxy system that provides strong, lasting, heat-resistant repairs up to 550°F. Mixed at a ratio of 1:1, it forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 250°F.

Great For:

  • Tile

  • Most Plastics

  • Ceramic

  • Glass

  • Wood

  • Metal

Cure Colour

Clear

Made in the USA US flag

Instructions

PREPARE:

Clean repair area of dirt, grease, oil, paint, rust etc. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide best repair.

MIX:

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix.

APPLY:

Press with appropriate tool in an even coat, weld beard or extruded shape as needed.

DRY:

Sets in 5 minutes. Cures in 1 hour. If temperature is below 40ºF, then set time will be longer.

bottom of page