top of page

J-B MarineWeld Epoxy Adhesive

8272 Front Final.png
JB8272

Strength

5020 PSI

Set Time

4 - 6 Hours

J-B MarineWeld is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others.

MarineWeld sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters’ surface. MarineWeld has a 1:1 mixing ratio and tensile strength of 5020 PSI.

 

Great For:

​

  • Boats

  • Personal Watercraft

  • In/Outboard Engines

  • Deck & Hull Accessories

  • Under Water/Wet Conditions

Functional Cure

15 - 24 Hours

Cure Colour

Dark Grey

Made in the USA US flag

Instructions

PREPARE:

Clean repair area of dirt, grease, oil, paint, rust etc. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse snadpaper to provide best repair.

MIX:

After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

APPLY:

Press with appropriate tool in an even coat, weld bead or extruded shape as needed.

DRY:

Sets in 4 - 6 hours. Cures in 15 - 24 hours. Allow 4 - 6 hours before handling and 15 hours (minimum) before putting object back in use.

bottom of page